FMSQuickReferenceCard.pdf

MJC8Q400, FMS QUICK REFERENCE CARD

| TURN ON | ON/OFF|ACCEPT-> | | --- | --- | | DIRECT TO ANY WPT | DTO|type WPT ID|ENTER|ENTER | | DIRECT TO FLIGHT PLAN WPT | DTO|type WPT number from the list|ENTER | | ADD WPT TO FLIGHT PLAN | FPL|type WPT ID|ENTER|ENTER | | INSERT WPT INTO FLIGHT PLAN | FPL|cursor to desired next WPT|type WPT ID|ENTER|ENTER | | DELETE WPT FROM FLIGHT PLAN | FPL|cursor to desired WPT|DEL|DEL | | ACTIVATE FLIGHT PLAN AFTER CHANGE | NAV|FR|type/verify FROM WPT number from the list|TO|type/verify TO WPT number from the list|make sure NX WPT is correct or select from the list,ENTER | | SET AFCS TO FLY LNAV | Turn NAV SOURCE selector on the glareshield, until FMS is the indicated nav source on the PFD, press LNAV on AFCS panel | | ADD AIRWAY SEGMENT TO FLIGHT PLAN | FPL|cursor after initial airway WPT|LIST|AIR/WAY->|select airway by number from the list|ENTER|type final WPT number from the list|ENTER | | DIRECT TO ANY HOLDING | DTO|HOLDING->|cursor to FIX|enter WPT id|ENTER|ENTER|adjust whatever parameters needed|DTO HOLD-> | | DIRECT TO PROCEDURAL HOLDING | DTO|HOLDING->|cursor to FIX|type the holding number(WPT with/H)from the list|DTO HOLD-> | | ADD SID TO THE FLIGHT PLAN | FPL|MENU|DEPART->|type airport id(if not present),2x ENTER|select runway ld from the list|ENTER|select SID id from the list|ENTER|select transition from the list(if any)|ENTER|ENTER to activate | | ADD STAR TO THE FLIGHT PLAN | FPL|MENU|ARRIVE->|type airport id(if not present),2x ENTER|select runway ld from the list|ENTER|select STAR id from the list|ENTER|select transition from the list(if any)|ENTER|ENTER to activate | | ERASE FLIGHT PLAN | FPL|type“99”|ENTER | | REVERSE FLIGHT PLAN | FPL|MENU|NEXT|INVERT FPL-> | | SAVE FLIGHT PLAN | FPL|MENU|STORE FPL->|type departure airport Id and arrival airport Id(no spaces)]ENTER | | RETRIEVE FLIGHT PLAN | FPL|type“99”|ENTER|type departure airport Id|ENTER|ENTER|copy PLT RTE->|select route number from the list|ENTER | | ARM VNAV FOR ENROUTE DESCEND | VNAV|cursor to TO|select WPT number from the list|ENTER|enter displacement if required|ENTER|enter the crossing altitude in feet(if not yet present)|ENTER|enter the desired Vertical Speed|ENTER to activate2 minutes prior to reaching the TOD,arm the VNAV on the AFCS panel,please note LNAV must be active for VNAV to engage and the altitude selector must be set lower than the current altitude | | ACTIVATE VNAV FOR IMMEDIATE DESCEND(to meet the ATC crossing restriction) | FPL|find the desired WPT(don't put cursor over it)|press LSK on the right side adjacent to the WPT,under ALT/FL|type the desired altitude in feet|ENTERVNAV|VTO->|select WPT number from the list|ENTER to activate|activateVNAV on AFCS panel,please note LNAV must be active for VNAV to engageand the altitude selector must be set lower than the current altitude | | PLAY THE PASSENGER ANNOUNCEMENT | DATA|CABIN DISP->|adjacent to the desired announcement,PLAY-> | | REQUEST GROUND POWER UNIT | DATA|SERVICES->|REQUESTIt will take a minute for a GPU to become available |